Browsing articles tagged with "EIA-541 Archives | SPI Semicon"

Microwave Devices, Transducers

  //   by spisemicon   //   Microwave Devices, Transducers, Trays/Strip Packs  //  Comments Off on Microwave Devices, Transducers

Microwave Devices, Transducers

Microwave Devices Transducers

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
SP-ACR1LT 5 Pair 1.00 X 1.00 X .312 Microwave
SP-ACR2LT 5 Pair 1.187 X 1.00 X .12 Microwave
SP-ACR25T 25 Foam Fit Microwave
SP-AK101 5 Pairs 2.08 X 1.775 X .145 Microwave
SP-BIP2 10 Form Fit Transistor
SP-HY1 10 1.00 X 1.00 X .688 Accommodates Stud
SP-RF1LT 10 Forms Fits Multiple Devices Five Devices Shapes
SP-RF1LTA 10 Forms Fits Multiple Devices Five Devices Shapes
SP-RF2 10 Form Fit Microwave
SP-SCX1LT 10 1.312 X 1.125 X 1.00 Transducer
SP-TD1 10 .875 X .875 X.625 Transducer
SP-ODP-20 20 .780 X .530 X .700 Opto-Devices
SP-RF3 15 Form Fits Two Devices Microwave

TO Devices, Flatpack Substrates

  //   by spisemicon   //   TO Devices, Flatpack Substrates, Trays/Strip Packs  //  Comments Off on TO Devices, Flatpack Substrates

TO Devices, Flatpack Substrates

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″.
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
TR-FM15 Tray 15 .680 X .680 X .130 Substrates
TR-FPC1LT 10 1.25 X .688 X .156 Flat Pack
TR-FPC2LT 5 2.062 X 2.062 X.531 Flat Pack
TR-FP/SD1LT 10 .750 x 1.125 X .375 Flat Pack or DIP
GT-35 Tray 35 .760 X .340 X .060 Substrate
TR-38LT 10 Form Fit TO-3
TO-5A Tray 20 Long Lead40 Short Lead Form Fit TO-5
TO-5/18-LT 10 Individual Pack TO-5 and TO-8
TO8T Tray 10 .625 diameter TO-8 TO-8
TO8LT 10 Short Lead TO-8
TO8-2LT 10 Long Lead TO-8
TO18A Tray 10 Long Lead20 Short Lead Form Fit TO-18
TO66 25 Form Fit TO-18
HY3 3 4.500 X 1.875 X .625 Form Fit
FPC3 3 3.125 X 3.375 X .4375 Large Carrier

Dual-in-Line (DIP) Devices

  //   by spisemicon   //   Dual-in-Line (DIP) Devices, Trays/Strip Packs  //  Comments Off on Dual-in-Line (DIP) Devices

Dual-in-Line (DIP) Devices

  • Individual devices protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
SP-CD1 3 Small Packages and 2 Large Packages Small: All .40 and .60LeadLage: All 90 Lead All Size DIPs
SP-FO1 10 2.0 X .938 X .250 Large DIPs
SP-FPSD1 LT 8 .75 X .53 X .50 DIPs or Flat Packs
SP-LD1 ALT 5 1.625 X .325 X .3125 16-28 Leads
SP-LD1 LT 5 2.125 X .688 X .280 16-40 Leads
SP-LD1 5 2.125 X .688 X .280 16-40 Lead
SP-LD2LT 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 5 DIPs .900 Wide
SP-LD2T
SP-LD3S 10 1.375 X .688 X .375Plus Heat Sink Large DIPsWith Heat Sink
SP-PB1LT 10 1.75 X 1.00 X .500 Piggyback DIPs
SP-PB3LT 10 2.00 X .75 X .625 Piggyback DIPs
SP-SD 1 10 1.188 X .375 X .280 Small DIP’s
SP-SD 1 LT 10 1.188 X .375 X .280 Small DIP’s
SP- LD 1 BLT 10 1.750 X .625 X .240 DIP with Piggyback Devices

Chip Carriers, PLCC-LCC

  //   by spisemicon   //   Chip Carriers, PLCC-LCC, Trays/Strip Packs  //  Comments Off on Chip Carriers, PLCC-LCC

Chip Carriers, PLCC-LCC

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Number of Lead
SP-CC1 LT 20 .385 X .390 X .050 20
SP-CC2 LT 20 .505 X .510 X .050 28
SP-CC3 LT 20 .650 X .675 X .050 44
SP-CC4 LT 10 .970 X .970 X .090 68
TR-CCT5 Tray 5 1.20 X .120 X .312 84
TR-CCT20 Tray 20 .85 X .52 X .312
TR-CCT25 Tray 25 .52 X .52 X .312 28
TR-CCT-LID
TR-FM15 Tray 15 .680 X .680 X .130
SP-GA2 LT 10 1.20 X 1.20 X .265 84
SP-RPS 1 Tray 25 1.20 X 1.20 X 375 84
SP-PLCC 1LT 15 .535 X .335.365 X .305 18R PLCC18R LCC
SP-PLCC 2LT 15 .380 X .380.358 X .358 20S PLCC20S LCC
SP-PLCC 3LT 10 .480 X .480.560 X .358 28S PLCC28R LCC
SP-PLCC 4LT 10 .595 X .495.560 X .458 32R PLCC32R LCC
SP-PLCC 5LT 10 .695 X .695.660 X .660 44S PLCC44S LCC
SP-PLCC 6LT 10 .790 X .790.760 X .760 52S PLCC52S LCC
SP-PLCC 7LT 10 1.00 X 1.00 68 PLCC

Pin Grid Array Devices

  //   by spisemicon   //   Pin Grid Array Devices, Trays/Strip Packs  //  Comments Off on Pin Grid Array Devices

Pin Grid Array Devices

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • “H”-style allows for heat sinks
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions
SP-BN1 LT 10 1.15 X 1.15 X .300
SP-BN1 7 1.15 X 1.15 X .300
SP-BN2 LT 10 1.40 X 1.40 X .250
SP-BN2 6 1.35 X 1.35 X .500
SP-BN2 S 5 1.50 X 1.50 X .340
SP-BN3 LT 10 1.25 X 1.25 X .500
SP-BN4 8 1.3125 X 1.3125 X .250
SP-BN4 6 1.55 X 1.55 X .500
SP-BN5 LT 7 1.5625 X 1.5625 X .250
SP-BN5 5 1.75 X 1.75 X .500
SP-BN6 7 1.562 X 1.5625 X .250
SP-GA1 LT 5 1.50 X 1.50 X .438
SP-GA2 LT 10 1.20 X 1.20 X .265
SP-GA3 LT 5 1.437 X 1.437 X .437
TR-HPS 1 Tray 25 1.2 X 1.2 X .375
TR-PGA15 Tray 15 1.62 X 1.62 X .400
TR-PGA20B Tray 20 1.690 X 1.690
TR-PGA25A Tray 25 1.324 X 1.325 X .360
TR-PGA25B Tray 25 1.325 X 1.325 x .360With Center Bump
TR-PGA30 Tray 30 1.400 X 1.400
TR-PGA30B Tray 30 1.575 X 1.575
TR-PGA36 Tray 36 .75 X .75 X .30
TR-PGA40 Tray 40 1.24 X 1.24
TR-PGA64 Tray 64 .75 X .75
TR-PGA80B Tray 80 .80 X .80
TR-PGA-LA (LID)

Fine Pitch Gull Wing Devices

  //   by spisemicon   //   Fine Pitch Gull Wing Devices, Trays/Strip Packs  //  Comments Off on Fine Pitch Gull Wing Devices

Fine Pitch Gull Wing Devices

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • EIA and EIAJ sizes
  • Gull wing leads “float” ensuring leading protection
  • Trays available with reinforced bottoms
  • Tray sizes 7.5 x 7.5 and 9 x 11
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Strip Pack Sizes Available
Part Number No. of Cavities Cavity Dimensions
SP-GW100 10 1.00 X .75
SP-GW132 15 1.20 X 1.20
SP-GW164 8 1.30 X 1.30
SP-GW32 10 .32 X .32
SP-GW39 10 .39 X .39
SP-GW51 10 .51 X .51
Tray Sizes Available
Part Number No. of Cavities Cavity Dimensions
GW15 LID
GW15T 15 .875 X .875
GW15B 15 .875 X 875
SP-GW100 25 .875 x .875
SP-GW132 15 1.20 X 1.20
SP-GW164 15 1.55 X 1.55
SP-G224 20 1.70 X 1.70
SP-GW39-51 (Cover) LID
SP-GW32 Bottom Works With GW39-51 Lid 10 .32 X .32
SP-GW39 Bottom Works With GW39-51 Lid 10 .39 X .39
SP-GW51 Bottom Works With GW39-51 Lid 10 .51 X .51

Device Trays

  //   by spisemicon   //   Device Trays, Trays/Strip Packs  //  Comments Off on Device Trays

   

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Trays stack for volume handling and shipping
  • Lids available for most trays
  • Part numbers: Add “C” For Conductive, Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available

Part Number No. of Cavities Cavity Dimensions Typical Device
TR-ACR25T 25 Form Fit Microwave
TR-CCT5 5 1.20 x 1.20 x .312 PLCC-LCC Chip Carrier
TR-CCT 20 20 .85 X .52 X .312 PLCC-LCC Chip Carrier
TR-CCT25 25 .52 X .52 X .312 PLCC-LCC Chip Carrier
TR-FM15 15 .680 x .680 x .130 Various
TR-FPC 100T 100 1.000 x .750 Flat Pack Carrier
TR-FPT 12C 12 2.250 x 2.260 Cerquad Flat Leads and Frame
TR-GW 15 Top/Bot. 15 .875 x .875 x .125 Fine Pitch Gull Wing
TR-GW 15B 15 .875 x .875 x .250 Fine Pitch Gull Wing with Bumpers
TR-HPS1 25 1.20 x 1.20 x .375 Pin Grid Array
TR-HPS2 15 1.10 X 2.20 X .375 Substrates
TR-HPS3 8 1.50 x 3.375 x .375 Substrates
TR-HPT25 25 1.56 X .890 X .180 Substrates
TR-HYB25 25 2.000 X 1.000 Large Hybrid Substrates
TR-HYT18 18 2.30 X .60 X .300 Substrates
TR-J44T 36 44 Lead Chip Carrier
TR-LF150T 150 Lead Frames
TR-LF150TA 150 Lead Frames
TR-MET1 60 1.00 x .562 x .125 Microwave
TR-PCC-20 20 1.775 x 1.775 124 Lead PLCC
TR-PGA-15 15 1.62 x 1.62 .400 Pin Grid Arrays
TR-PGA-15A 25 1.324 x 1.324 x .360 Pin Grid Arrays
TR-PGA25B 25 1.324 x 1.324 x .3660 Pin Grid Arrays with Center Bumps
TR-PGALID Pin Grid Arrays
TR-SCX16T 16 Form Fit Transducers
TR-SPX1T 20 Form Fit Transducers
TR-SS40T 40 Form Fit Substrates
TR-TO66 25 Form Fit TO-66
TR-TO220 60 Form Fit TO-220 Device
TR-WT 6 T 6 3.375 x 3.375 x 1875 3″ Wafers

 

 

 

 

No Fields Found.

Corporate Headquarters

2670 South Commerce Way
Ogden, UT 84401
Tel: 801.399.5723
Fax: 801.393.7559
Toll Free: 1.888.295.5906

Quick Navigation