Dual-in-Line (DIP) Devices

  //   by spisemicon   //   Dual-in-Line (DIP) Devices, Trays/Strip Packs  //  Comments Off on Dual-in-Line (DIP) Devices

Dual-in-Line (DIP) Devices

  • Individual devices protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
SP-CD1 3 Small Packages and 2 Large Packages Small: All .40 and .60LeadLage: All 90 Lead All Size DIPs
SP-FO1 10 2.0 X .938 X .250 Large DIPs
SP-FPSD1 LT 8 .75 X .53 X .50 DIPs or Flat Packs
SP-LD1 ALT 5 1.625 X .325 X .3125 16-28 Leads
SP-LD1 LT 5 2.125 X .688 X .280 16-40 Leads
SP-LD1 5 2.125 X .688 X .280 16-40 Lead
SP-LD2LT 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 5 DIPs .900 Wide
SP-LD2T
SP-LD3S 10 1.375 X .688 X .375Plus Heat Sink Large DIPsWith Heat Sink
SP-PB1LT 10 1.75 X 1.00 X .500 Piggyback DIPs
SP-PB3LT 10 2.00 X .75 X .625 Piggyback DIPs
SP-SD 1 10 1.188 X .375 X .280 Small DIP’s
SP-SD 1 LT 10 1.188 X .375 X .280 Small DIP’s
SP- LD 1 BLT 10 1.750 X .625 X .240 DIP with Piggyback Devices

Comments are closed.

No Fields Found.

Corporate Headquarters

2670 South Commerce Way
Ogden, UT 84401
Tel: 801.399.5723
Fax: 801.393.7559
Toll Free: 1.888.295.5906

Quick Navigation