Browsing articles by "spisemicon, Author at SPI Semicon"

Terms & Conditions

  //   by spisemicon   //   About, Terms & Conditions  //  Comments Off on Terms & Conditions

SPI Semicon
General Terms and Conditions of Sale

 

  1. Seller and Buyer Definitions:  In these General Terms and Conditions of Sale (the “Terms”) SPI Semicon is referred to as “Seller.”  The party to whom Seller’s quotation, sales order, order confirmation packing slip, delivery receipt, or invoice is addressed is referred to as “Buyer.”  Seller and Buyer are collectively referred to as the “Parties” and are individually referred to a “Party.”
  2. Incorporation:  The Terms are incorporated by reference into all of Seller’s quotations, sales orders, order confirmations, packing slips, e-mail communications, invoices and sales to Buyer.
  3. Quotations; Purchase Orders; Confirmation/acknowledgement of Orders: Seller’s written quotations automatically expire 30 days after the date issued unless otherwise specified in the quotation.  A verbal quotation expires on the day that it was made.  All quotations are subject to the Terms.  Buyer’s purchase order is for information purposes only.  Seller’s order confirmation/acknowledgement confirms only that Seller has received Buyer’s purchase order for product and is not acceptance of Buyer’s terms and conditions.
  4. Entire Agreement; Amendment; Waiver:  Seller’s quotation, sales order, order confirmation, packing slips, email, communications, invoice, and the Terms constitute the entire agreement between the Parties with respect to the sale of Seller’s products to Buyer (the “Agreement”) and supersede all other representations, terms, conditions, agreements or understandings, written or oral, between the Parties with respect to such sale.  Any terms, conditions or other provisions contained in any request for quotation, purchase order, e-mail or other communication from Buyer that are in addition to or inconsistent with the Agreement (collectively “Buyer Provisions”) are of no force and effect and are not binding upon Seller unless Seller’s Sales Manager accepts such terms, conditions or other provisions in a signed writing that specifically refers to any such Buyer Provisions.  The Agreement cannot be amended orally or by any course of conduct by either Party, but may only be amended by a further written agreement fully executed by the Parties.  Seller’s failure or delay to enforce any provision of the Agreement shall not be construed as a waiver of such provision or Seller’s right to enforce such provision.  Seller’s failure or delay to object to any Buyer Provisions shall not be construed as a waiver, amendment or modification of the Agreement, nor an acceptance of any such Buyer Provisions.
  5. Prices:  Pricing errors by Seller are subject to correction prior to Buyer’s receipt of Seller’s order confirmation/acknowledgement.  Seller’s prices do not include any transportation, freight or storage costs or any applicable  property, sales, use, privilege or export taxes, custom duties or any other tax, fee or charge of any nature whatsoever imposed by any government authority on or measured by any transaction between the Parties, all of which are Buyer’s sole responsibility.  If any of the foregoing must be prepaid by Seller, Buyer shall pay such amounts no later than the time at which payment for the goods is due.
  6. Payment: Terms of payment are the net amount of the invoice in United States currency within 30 days of the date of the invoice, unless otherwise stated in writing in Seller’s invoice.  A late payment charge of one and one-half percent (1.5%) of the amount of the invoice will be charged for each month, or any portion thereof, that payment is not made within 30 days after the date of the invoice, unless otherwise stated in writing in Seller’s invoice.
  7. Shipment; Shortages; Delay; Risk of Loss; Inspection and Acceptance: Shipment dates are estimates only.  Seller shall have no liability if shipment is made after the estimated dates.  Seller may make delivery installments, separately invoiced, which shall be payable without regard to subsequent deliveries.  Delay in delivery of any installment will not relieve Buyer of its obligations to accept and pay for any other installments.  If shipments are delayed by Buyer, Seller’s invoices may be rendered on the dates Seller is prepared to make shipments.  If completion of manufacture is delayed by Buyer, Seller’s invoices may be rendered when delay is ascertained, based upon percentage of completion.  Products will be shipped f.o.b. point of origin, with all risk of loss or damage to products passing to Buyer upon delivery to carrier; provided, however, that products held by Seller as a result of Buyer’s inability or refusal to accept delivery will be held at Buyer’s sole risk, cost and expense.  Within 30 days after receipt of the products, Buyer shall inspect the goods and report to Seller in writing any claim for shortage, damage or non-conformity, and if Buyer fails to do so, Buyer waives any such claim and shall be deemed to have accepted the products without further right of revocation.
  8. Force Majeure: Seller will not be liable for any delay or failure in performance of the Agreement, including without limitation, the delivery or shipment of any product or for any damages or losses suffered by Buyer or any third party which are caused by, or in any manner arise from, directly or indirectly, in whole or in part, any labor disturbances, embargos, riots, storms, fires, explosions, acts of God or public enemies, inability to obtain necessary labor or materials, accidents or breakdown to, or mechanical failure of, machinery or equipment, changes in economic conditions, delays or interruptions in transportation or any other causes beyond Seller’s reasonable control.  In the event of such delay, the applicable shipment date(s) will be postponed to compensate for such delay.  If Seller’s performance is rendered permanently impossible or impracticable either Party may cancel the affected order(s) upon written notice to the other Party, and, upon such cancellation, Seller will have no liability and Buyer will be liable to pay only for the pro-rated or allocated portion of such order(s) completed, including without limitations all inventory and supplies not returnable for full credit or otherwise usable by Seller.
  9. Warranty: Seller’s Limited Warranty: Seller is a distributor of products manufactured by others.  All products manufactured by others and sold by Seller to Buyer will be covered only by the warranty provided by the manufacturer of such products and Buyer agrees to look solely to such manufacturer and not to Seller for any warranty claims relating to such products.  SELLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCTS (OR SERVICES)
  10. Exclusion of All Other WarrantiesTO THE EXTENT PERMITTED BY LAW, THE WARRANTY PROVIDED BY SELLER IN SECTION 9 ABOVE IS IN LIEU OF, AND EXCLUSIVE OF, ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY SELLER.  ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, IMPLIED WARRANTY OF FITNESS FOR USE, AND IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED.  No one is authorized to make or modify any warranties on behalf of Seller.
  11. Limitation of Liability; Exclusion of Damages: Seller’s liability with respect to any claim by Buyer or any third party arising out of or in any way relating to any product sold by Seller to Buyer (including, without limitation such product’s sale, use, fitness for a particular purpose or transportation) will be limited solely to the cost of such product and any such claim must be submitted to Seller within 30 days after delivery of such product.  SELLER WILL NOT BE LIABLE TO BUYER OR TO ANY THIRD PART FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR INDIRECT DAMAGES, LOST PROFITS OR OTHER LOSSES OF BUYER OR ANY THIRD PARTY ARISING OUT OF OR IN ANY WAY RELATING TO THE SALE, USE OR TRANSPORTATION OF SUCH PRODUCT.
  12. Confidential Information: Seller’s technical, trade secret, proprietary, confidential and similar information (collectively, “Confidential Information”) disclosed or furnished by Seller to Buyer is the sole and exclusive property of Seller.  Seller’s disclosure of Confidential Information to Buyer shall not be construed as granting to Buyer any right, title or interest of any kind in any Confidential Information.  Buyer shall keep all Confidential Information confidential and shall not disclose it to any person or entity without Seller’s prior written consent..  Buyer shall reimburse Seller for any damages, losses, costs, expenses and reasonable attorneys’ fees, suffered or incurred by Seller as a result of Buyer’s improper use or disclosure of Confidential Information.  Upon Seller’s request, Buyer will promptly deliver to Seller all of the Confidential Information, including without limitation all copies or extracts thereof or based thereon.  Buyer (a) acknowledges that breach of this Section 12 will cause Seller irreparable harm and that a remedy at law for such a failure would be an inadequate remedy for Seller and (b) consents to Seller’s obtaining from a court specific performance, an injunction, a restraining order or other equitable relief in order to enforce such provision.  Seller’s right to seek and obtain any such relief is in addition to, and not in lieu of, any other remedy to which it is entitled under applicable law (including without limitation monetary damages).
  13. Default: If Buyer (a) fails to pay all or any part of any invoice when due, (b) fails to observe or perform any of its other obligations under the Agreement or (c) becomes insolvent, is adjudicated as bankrupt, voluntarily files or permits the filing of a petition in bankruptcy, makes an assignment for the benefit of creditors, seeks any similar relief under any bankruptcy laws or related statutes or a receiver is appointed for its assets, then all sums due or to become due from Buyer to Seller, may at Seller’s sole option, become immediately due and payable, and concurrently, or in the alternative, Seller may, at its sole option, terminate any existing order(s) between the Parties and exercise any other remedies available to Seller under applicable law.  Buyer hereby grants to Seller a security interest in and first priority lien on (a) all products sold by Seller until such time as Buyer has pay in full for the products, and (b) all materials and products that incorporate products sold by Seller until such time as Buyer has paid in full for the products sold by Seller.
  14. Specifications; Suitability:  Buyer is solely responsible for determining the specifications, design and performance of products purchased by Buyer from Seller, including the suitability of products for Buyer’s intended use.  Seller shall have no such responsibility.  Buyer agrees that it has made its own independent determination of suitability of the products for Buyer’s intended use without reliance on Seller.  Buyer shall indemnify, defend and hold harmless Seller from and against all claims, losses, damages, attorneys’ fees, expert fees and costs and other expenses arising from any claim or contention that the products specified, designed or selected by Buyer and sold by Seller (a) are defective or deficient in specification, design, performance or suitability for Buyer’s intended use or (b) infringe, violate or misappropriate any patent, trade secrets, trademark or copyright.
  15. Attorneys’ Fees, Costs and Expenses; Indemnification: In any proceeding, action or arbitration concerning an Agreement or the Terms, the prevailing Party shall be entitled to be its reasonable attorneys’ fees, expert expenses, costs and other disbursements from the other Party.  If Seller is made a party in any proceeding, action or arbitration involving any claim by or against Buyer or by or against any other entity or person based in whole or in part on any product sold by Seller to Buyer, Buyer shall indemnify, defend and hold harmless Seller from and against all claims, losses, damages, attorneys’ fees, expert fees and costs and other expenses incurred by Seller in connection with such proceeding, action or arbitration.
  16. Cancellation: Buyer may not cancel any purchase order acknowledged by Seller without first obtaining Seller’s written consent and without reimbursing Seller for all costs, expenses and losses incurred by Seller as a result of such cancellation, including without limitation Seller’s reasonable profit and overhead. 
  17. Governing Law; Jurisdiction; Venue:  The entire transaction and dealings between Seller and Buyer, including without limitation the interpretation and effect of the Parties’ Agreement, the Terms, Buyer’s request for quotation, Seller’s quotation, Buyer’s purchase order, Seller’s order acknowledgement, Seller’s invoice, shall be governed by and must be construed according to the laws of the State of California without reference to principles of conflicts of law.  Each of the Parties hereby irrevocably and unconditionally (a) consents to submit to the exclusive jurisdiction of the United States District Court for the Central District of California and the applicable state court located in Orange County, California for any action or proceeding arising out of or relating to the sale of Seller’s products to Buyer, (b) agrees that the sole and exclusive venue for any such action or proceeding shall be the courts specified in (a) above and (c) waives and agrees not to plead or claim in any such court that any such action or proceeding brought in any such court has been brought in an inconvenient forum.
  18. Successors and Assigns; Assignment: The Parties’ Agreement, including the Terms shall be binding upon each Party and its successors and assigns; provided, however, that Buyer shall not assign any of its rights or duties hereunder without Seller’s prior written consent, which consent may be withheld in Seller’s sole discretion, and in the event of assignment, Buyer shall remain responsible for full performance of Buyer’s obligations.

Note to Customers

It is the nature of our business that we must post such Disclaimer notices, however; please understand that SPI Semicon will support its customers and attempt to accommodate you in any situation where you have become dissatisfied with our products or services. We firmly believe that the “customer is always right” and will assist you in every way possible.

Please do not hesitate to call us and discuss any situation for which you have not received proper service or have incurred a difficulty with a material product that we have sold to you.

About

  //   by spisemicon   //   About  //  No Comments
Semiconductor Packaging

Our manufacturing facility in Ogden, Utah

SPI/Semicon was formed by combining two of the industry leaders in Semiconductor packaging, Semicon Systems and Semiconductor Products.  Semicon Systems began in 1970 making containers for transport and storage of silicon wafers, which was an emerging industry at the time.  Semiconductor Products was launched in 1987 as a division of Professional Plastics and competed head to head with Semicon Systems.  In 1995 Semicon Systems was purchased by Semiconductor Products and the current company was formed and named SPI/Semicon.  Professional Plastics is still the parent company of SPI/Semicon.

SPI/Semicon remains at the forefront of wafer transport and storage systems, but has expanded their semiconductor packaging offering to include a wide range of products beyond just wafer packaging.  Our Engineering Department has developed new products that protect items from the front end of wafer fabrication all the way to the very back end after a component has been produced until it is installed in a finished consumer product.

Our company’s capabilities have greatly expanded over the decades.  SPI/Semicon has a large state-of-the-art manufacturing facility in Ogden Utah.  Our “in-house” capabilities include injection molding, deep draw vacuum forming, and high speed in-line vacuum forming, die cutting, shape and tube extrusion, CNC machining, custom fabrication, assembly and testing.

SPI/Semicon expanded their worldwide presence to Asia in the year 2000 opening a fully integrated manufacturing facility in Cavite, Philippines.  Our Philippine operation has the same capabilities of our Utah facility, but with ten times the capacity of IC tube production.

Both of our manufacturing facilities are certified to ISO 9001 and our products are RoHs compliant.

SPI/Semicon has highly trained personnel in many countries to service our worldwide presence in the Semiconductor Industry.  And we have the ability to design products through our engineering group to meet the ever changing products that electronics manufacturers are creating.  We pride ourselves on our customer service, listening to our customers’ needs, then reacting quickly with solutions.

SPI/Semicon Philippines, Inc.

  //   by spisemicon   //   About, SPI/Secmicon Philippines  //  Comments Off on SPI/Semicon Philippines, Inc.
A picture of some of our extrusion lines in Cavite, Philippines

A picture of some of our extrusion lines in Cavite, Philippines

Registered with the Securities and Exchange Commission under SEC Requistration No. A199803195.

Registered as an ECOZONE EXPORT ENTERPRISE with the Philippine Economic Zone Authority, under Certificate of Registration No. 98-041

BIR Registration No. 98-540-005256

BIR Registration No. 03-9112986-5

General Information

  • 11 High Speed Extrusion Machines
  • 1 Unit Profile Projector
  • Silk-screen Printing
  • 2 Air Compressors (1 Back-up)
  • 2 chillers (1 Back-up)
  • 1 Cooling Tower
  • 2 Semi-Automatic Silk-Screen Printing Machines
  • In-house machine Shop

Manpower Complement

  • 3 Managers
  • 4 Sales/Admins
  • 3 IQA/Engineering
  • 100 Production

Process Capability

  • All types of single-extruded PVC tubes up to 3″ width
  • END-PLUGS
  • END-PINS
  • Recycling

Monthly Tube Capacity

  • Present- 5,000,000

Managing Director and Location Information

David W. Lim

Block 2, Phase 3, Peza Drive

First Cavite Industrial Estate (FCIE)

Barangay Langkann, Damarias

Cavite, Philippines

Tel: 046.402.0354/402.0553

Fax: 046.402.0252

Click here to Email SPI/Semicon Philippines, Inc.

SPI/Semicon Mission

  //   by spisemicon   //   About, Our Mission  //  Comments Off on SPI/Semicon Mission

The mission of SPI/Semicon:

To provide the most innovative and highest quality protective packaging for wafer and component protection in the semiconductor industry.

ISO 9008:2008

  //   by spisemicon   //   About  //  Comments Off on ISO 9008:2008

SPI/Semicon has received international recognition for the quality of its systems with the awarding of the prestigious ISO 9001:2008 certification. Under the requirements of the ISO 9008:2008 certification, an organisation needs to demonstrate its ability to consistently provide products or services and to enhance customer satisfaction in order to meet customer statutory and regulatory requirements.

We strive for excellence and receiving the ISO 9008:2008 certification is something we are very proud of as a company.

 

 

Microwave Devices, Transducers

  //   by spisemicon   //   Microwave Devices, Transducers, Trays/Strip Packs  //  Comments Off on Microwave Devices, Transducers

Microwave Devices, Transducers

Microwave Devices Transducers

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
SP-ACR1LT 5 Pair 1.00 X 1.00 X .312 Microwave
SP-ACR2LT 5 Pair 1.187 X 1.00 X .12 Microwave
SP-ACR25T 25 Foam Fit Microwave
SP-AK101 5 Pairs 2.08 X 1.775 X .145 Microwave
SP-BIP2 10 Form Fit Transistor
SP-HY1 10 1.00 X 1.00 X .688 Accommodates Stud
SP-RF1LT 10 Forms Fits Multiple Devices Five Devices Shapes
SP-RF1LTA 10 Forms Fits Multiple Devices Five Devices Shapes
SP-RF2 10 Form Fit Microwave
SP-SCX1LT 10 1.312 X 1.125 X 1.00 Transducer
SP-TD1 10 .875 X .875 X.625 Transducer
SP-ODP-20 20 .780 X .530 X .700 Opto-Devices
SP-RF3 15 Form Fits Two Devices Microwave

TO Devices, Flatpack Substrates

  //   by spisemicon   //   TO Devices, Flatpack Substrates, Trays/Strip Packs  //  Comments Off on TO Devices, Flatpack Substrates

TO Devices, Flatpack Substrates

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″.
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
TR-FM15 Tray 15 .680 X .680 X .130 Substrates
TR-FPC1LT 10 1.25 X .688 X .156 Flat Pack
TR-FPC2LT 5 2.062 X 2.062 X.531 Flat Pack
TR-FP/SD1LT 10 .750 x 1.125 X .375 Flat Pack or DIP
GT-35 Tray 35 .760 X .340 X .060 Substrate
TR-38LT 10 Form Fit TO-3
TO-5A Tray 20 Long Lead40 Short Lead Form Fit TO-5
TO-5/18-LT 10 Individual Pack TO-5 and TO-8
TO8T Tray 10 .625 diameter TO-8 TO-8
TO8LT 10 Short Lead TO-8
TO8-2LT 10 Long Lead TO-8
TO18A Tray 10 Long Lead20 Short Lead Form Fit TO-18
TO66 25 Form Fit TO-18
HY3 3 4.500 X 1.875 X .625 Form Fit
FPC3 3 3.125 X 3.375 X .4375 Large Carrier

Dual-in-Line (DIP) Devices

  //   by spisemicon   //   Dual-in-Line (DIP) Devices, Trays/Strip Packs  //  Comments Off on Dual-in-Line (DIP) Devices

Dual-in-Line (DIP) Devices

  • Individual devices protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Device
SP-CD1 3 Small Packages and 2 Large Packages Small: All .40 and .60LeadLage: All 90 Lead All Size DIPs
SP-FO1 10 2.0 X .938 X .250 Large DIPs
SP-FPSD1 LT 8 .75 X .53 X .50 DIPs or Flat Packs
SP-LD1 ALT 5 1.625 X .325 X .3125 16-28 Leads
SP-LD1 LT 5 2.125 X .688 X .280 16-40 Leads
SP-LD1 5 2.125 X .688 X .280 16-40 Lead
SP-LD2LT 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 4 3.30 X .950 X .375 40-64 Leads
SP-LD2 5 DIPs .900 Wide
SP-LD2T
SP-LD3S 10 1.375 X .688 X .375Plus Heat Sink Large DIPsWith Heat Sink
SP-PB1LT 10 1.75 X 1.00 X .500 Piggyback DIPs
SP-PB3LT 10 2.00 X .75 X .625 Piggyback DIPs
SP-SD 1 10 1.188 X .375 X .280 Small DIP’s
SP-SD 1 LT 10 1.188 X .375 X .280 Small DIP’s
SP- LD 1 BLT 10 1.750 X .625 X .240 DIP with Piggyback Devices

Chip Carriers, PLCC-LCC

  //   by spisemicon   //   Chip Carriers, PLCC-LCC, Trays/Strip Packs  //  Comments Off on Chip Carriers, PLCC-LCC

Chip Carriers, PLCC-LCC

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions Typical Number of Lead
SP-CC1 LT 20 .385 X .390 X .050 20
SP-CC2 LT 20 .505 X .510 X .050 28
SP-CC3 LT 20 .650 X .675 X .050 44
SP-CC4 LT 10 .970 X .970 X .090 68
TR-CCT5 Tray 5 1.20 X .120 X .312 84
TR-CCT20 Tray 20 .85 X .52 X .312
TR-CCT25 Tray 25 .52 X .52 X .312 28
TR-CCT-LID
TR-FM15 Tray 15 .680 X .680 X .130
SP-GA2 LT 10 1.20 X 1.20 X .265 84
SP-RPS 1 Tray 25 1.20 X 1.20 X 375 84
SP-PLCC 1LT 15 .535 X .335.365 X .305 18R PLCC18R LCC
SP-PLCC 2LT 15 .380 X .380.358 X .358 20S PLCC20S LCC
SP-PLCC 3LT 10 .480 X .480.560 X .358 28S PLCC28R LCC
SP-PLCC 4LT 10 .595 X .495.560 X .458 32R PLCC32R LCC
SP-PLCC 5LT 10 .695 X .695.660 X .660 44S PLCC44S LCC
SP-PLCC 6LT 10 .790 X .790.760 X .760 52S PLCC52S LCC
SP-PLCC 7LT 10 1.00 X 1.00 68 PLCC

Pin Grid Array Devices

  //   by spisemicon   //   Pin Grid Array Devices, Trays/Strip Packs  //  Comments Off on Pin Grid Array Devices

Pin Grid Array Devices

 

  • Individual device protection
  • Black conductive or clear antistatic PVC
  • Clear antistatic allows for easy identification
  • Reopens and closes without generating static charge
  • “LT” strip-pak supplied with either antistatic foam or conductive foam inserts
  • “H”-style allows for heat sinks
  • Part Numbers Add “C” For Conductive Add “A” For Antistatic
  • Clear impregnated static dissipative PVC or PETG.
  • Standard Thickness are .020″, .030″, .035″ and .050″
  • This Material meets or exceeds the EIA-541 and ESO/ESD S.11.11 requirements for resistivity and static
  • decay at 12% relative humidity
  • Black conductive high impact polystyrene, standard thickness .020″ and .030″

 

 

Sizes Available
Part Number No. of Cavities Cavity Dimensions
SP-BN1 LT 10 1.15 X 1.15 X .300
SP-BN1 7 1.15 X 1.15 X .300
SP-BN2 LT 10 1.40 X 1.40 X .250
SP-BN2 6 1.35 X 1.35 X .500
SP-BN2 S 5 1.50 X 1.50 X .340
SP-BN3 LT 10 1.25 X 1.25 X .500
SP-BN4 8 1.3125 X 1.3125 X .250
SP-BN4 6 1.55 X 1.55 X .500
SP-BN5 LT 7 1.5625 X 1.5625 X .250
SP-BN5 5 1.75 X 1.75 X .500
SP-BN6 7 1.562 X 1.5625 X .250
SP-GA1 LT 5 1.50 X 1.50 X .438
SP-GA2 LT 10 1.20 X 1.20 X .265
SP-GA3 LT 5 1.437 X 1.437 X .437
TR-HPS 1 Tray 25 1.2 X 1.2 X .375
TR-PGA15 Tray 15 1.62 X 1.62 X .400
TR-PGA20B Tray 20 1.690 X 1.690
TR-PGA25A Tray 25 1.324 X 1.325 X .360
TR-PGA25B Tray 25 1.325 X 1.325 x .360With Center Bump
TR-PGA30 Tray 30 1.400 X 1.400
TR-PGA30B Tray 30 1.575 X 1.575
TR-PGA36 Tray 36 .75 X .75 X .30
TR-PGA40 Tray 40 1.24 X 1.24
TR-PGA64 Tray 64 .75 X .75
TR-PGA80B Tray 80 .80 X .80
TR-PGA-LA (LID)
Pages:1234»
No Fields Found.

Corporate Headquarters

2670 South Commerce Way
Ogden, UT 84401
Tel: 801.399.5723
Fax: 801.393.7559
Toll Free: 1.888.295.5906

Quick Navigation